Hey there! This post contains affiliate links to products. We may receive a commission for purchases made through these links. But it never influences our product selection process.
When you’re all set to watch your favorite show, suddenly the DVD player isn’t turning on. You must be irritated and wondering what happened.
Cyberhome DVD player is such a DVD player where you can play your recorded show. The ease of enjoying the show after prime time and without any advertisement is fun.
Sometimes, this fun turns into misery. Because cyberhome DVD player won’t turn on. But, why does it happen?
The reason for cyberhome DVD player won’t turn on could be it’s in standby mode. Or, a loosely plugged-in or damaged power cord. Also, a damaged power supply board might trigger the bug. The solutions are simple. You just need to be careful and have knowledge about the DVD player.
This is not all. Hang in there to get the solutions.
CyberHome CH-DVR 1500 DVD Recorder and Player
- Media Type: CD, DVD
- Brand: Cyberhome
- Color: Silver
- Package Includes: DVD player, remote control, batteries, power cord, stereo analog audio/composite-video interconnect, RF audio/video interconnect, RF splitter, DVD+RW discs, and disc holder.
Sony BDP-S1700 Multi Region Blu-ray DVD Player
- Media Type: DVD, Blu-Ray Disc
- Brand: Dynastar
- Connectivity Technology: Wi-Fi, USB, Ethernet, HDMI
- Connector Type: HDMI
- Color: Black
- Video Compatibility: NTSC
Cyberhome DVD Player Troubleshooting
It’s very common for DVD players to not get started. Just like, cyberhome DVD player won’t open when it gets a bug. But, it’s no rocket science to make it turn on. You need to know the issue and then solve it accordingly.
I’ve found four suspects. You’ll get answer to what to do if DVD player won’t open or turn on.
Stick around!
Problem 1: Standby Mode
Sometimes, you forget to off the standby mode on your DVD player. This results in DVD player doesn’t turn on.
The problem is bizarre so the solution is too simple.
Solution:
If this is the situation, you’ll see the Standby light is blinking. Your first job is to turn the DVD player off. Then, wait for a while until you turn it on again.
After doing this simple task, your DVD player will start playing. But, what if it doesn’t?
The problem might be in the power cord. It’s time to find out!
Problem 2: Loosely Connected AC Power Cord
A loosely connected AC power cord can be put at blame. This can also answer what causes a DVD player to stop working.
Sometimes, the wall socket you used for the plugin is damaged. Or you may have loosely plugged in the cord. In that case the DVD player won’t get any power and it won’t turn on.
Solution:
The solution is to check the socket before plugging it in. Also, have a look at the power cord. Use the right cord and connect properly. Otherwise, you’ll face a similar situation like JBL boombox when it won’t charge.
You should not be wrong about plugging in the power cord. Sometimes you do connect the DVD power cord properly still it doesn’t turn on.
The problem then can be a damaged AC power cord.
Problem 3: Damaged AC Power Cord
Sometimes, you will get a power cord with a bare wire hanging. It is the reason why DVD player isn’t starting even after connecting the cord properly.
It’s dangerous as well. So, watch out for these types of power cords.
Solution:
The solution here is to replace the power cord. There is no DIY solution to this. While getting a new one, make sure it’s compatible with the DVD player.
If it’s not your problem, the last suspect is a damaged power supply board.
Problem 4: Damaged Power Supply Board
If the fuse is blown out, then power supply board is definitely damaged. This is triggering the cyberhome DVD player or any DVD player to act weirdly.
A damaged power supply board won’t let your DVD player power on. Similar to a not working USB port for a recliner.
Solution:
The solution is to look at the fuses on the power supply board. If possible, make it repair. Otherwise, replacement is the best option to go for.
A burnt fuse must be replaced with a new one for sure. If you’re confident enough to do so, go for it. Else, a repair shop should also be considered.
What if nothing works? And you wanted to know what to do when your DVD player won’t play.
I’ve prepared a small segment to answer that as well.
How to Fix a DVD Player That Won’t Play?
You can actually adopt a few techniques to fix a DVD player that won’t play.
- First, find a compatible DVD disc for the DVD player. An incompatible one can’t be played by the player.
- Sometimes, dirty disc cause problems. Make sure your disc is clean before placing it on the DVD player.
- You can also try using third-party DVD player software.
- Outdated DVD firmware can also trigger the issue. So, make sure to update to the latest DVD firmware.
- Lastly, know your region code. Some DVD players are locked in specific regions. You can unlock them with the help of a DVD ripper.
Check out this region-free cyberhome CH DVD 300S with progressive scan DVD player.
These are some techniques you can use to fix your DVD player that isn’t playing.
I am about to finish this short and simple troubleshooting guideline. Hope you like it and will surely get results.
Frequently Asked Questions (FAQs)
What Causes A DVD Not To Play?
A dirty and full of scratched DVD won’t play your file. It must be clean and smudge-free before playing. Also, a disc that is incompatible with a DVD player can’t be played. Make sure, the DVD player is free from parental control. With parent control on, it can’t start playing without unlocking it.
Will A Cracked DVD Still Play?
It depends on the intensity of cracks on the DVD. A few cracks won’t do any problem to the player. But, if it’s cracked from all sides, you better watch out. A fully cracked DVD won’t just play but also harm the player. It’s better to buy a new one. Otherwise, face the consequences.
Can You Recover Data From A Cracked DVD?
Yes, you can recover data from a cracked DVD. You just need to be patient. To recover data grab your old or unused CD or DVD drive. Make sure you have the necessary software installed to copy data from the cracked DVD. Set the transfer speed at the slowest possible rate.
How Do You Tell If A DVD Is Broken?
To tell if the DVD is broken or not, check the DVD lens. Clean the lens with an alcohol pad and gently do that. Make sure it’s free from any dirt and smudges. Once it’s clean place a shiny DVD and sees if it works. If you still get no result, replace it.
Final Thoughts
I’m glad you made it to the end. Now it’s clear why cyberhome DVD player won’t turn on. You can easily fix the issue sitting at home.
It’s important to use a sound DVD player and a clean disc. It’ll lessen the trouble.
That’s all. Until next time, keep fixing!
Hey, I’m Steven Jones, the founder, and writer of this site. I have worked in Electrical for the past 5 years. I also know how to save energy and how to troubleshoot our electrical devices. I hope you enjoy my blog.
